This article is related to all MeshForce products.
Usually, you may feel the product a little warm after it has been running for a long time. To enhance the stability of the Meshforce system and extend its life, we design the Maintenance Schedule function considering from the perspective of consumers.
If you enable Maintenance Schedule, the Meshforce system will reboot automatically after reaching the time you set. And about Delay Reboot, there are two conditions:
One: If you enable Delay Reboot
(1) After reaching the time you set for maintenance schedule, if there is a device connected to the router and the data traffic of the WAN port is greater than 3KB / s in 30 minutes, then the router will delay rebooting .
(2) If there is a device connected to the router but the data traffic of the WAN port is less than 3KB/s in 30 minutes or there is no device connected to the router, then the router will reboot immediately after reaching the time you set.
TWO: If you disable Delay Reboot
The router will reboot immediately after reaching the time you set for maintenance schedule.